DIY Removable Extensions for Your Harbor Freight Motorcycle Lift
Step-by-Step Guide for Enhanced Functionality
Introduction
Harbor Freight's motorcycle lift is a valuable tool for servicing and maintaining your ride. However, its limited length can be a drawback, especially for larger or wider motorcycles. In this article, we'll guide you through the process of creating simple and removable extensions for your lift, giving you added versatility and workspace.
Materials and Tools Required
To build the extensions, you'll need the following materials:
- Two 2x10 planks, 8 feet long
- Three 1x1 aluminum angles from ACE Hardware
- Scrap piece of 3/4-inch plywood, 24 x 20 inches
- 14 pieces of 5/16 x 4 hex head screws
- Scrap pieces of 2x4 and 1x4 lumber
Additionally, you'll need the following tools:
- Circular saw
- Drill
- Screwdriver
- Measuring tape
- Pencil or marker
Step 1: Measuring and Assembly
Start by marking and cutting the 2x10 planks to a length of 48 inches. These will form the main support for your extensions.
Next, cut the aluminum angles into 24-inch sections. Position the angles on the underside of the 2x10 planks, flush with the edges, and secure them with the hex head screws.
Finally, attach the plywood scrap to the aluminum angles using more screws. This will provide a sturdy platform for your motorcycle.
Step 2: Attaching to the Lift
Once the extensions are assembled, you'll need to attach them to the lift table. To do this:
- Position the extensions on the lift, ensuring they are centered and aligned.
- Use scrap pieces of 2x4 or 1x4 lumber as spacers to create a gap between the lift and the extensions.
- Secure the extensions to the lift using bolts or screws, ensuring they are firmly fixed.
Conclusion
With these removable extensions, you can now accommodate larger and wider motorcycles on your Harbor Freight lift. The extensions are easy to remove when not in use, providing a versatile and convenient solution for your motorcycle servicing needs.
Remember to follow all safety precautions when working on or around your motorcycle and lift, and refer to the manufacturer's instructions for proper usage of the equipment.
Comments